special report South East Water IoT trial aims to transform water networks I n Australia, South East Water ran a pilot test on a new low- powered communications technology that aims to extend the use of real-time monitoring, and to help improve the reliability, efficiency and safety of its water and sewer assets. The Victorian utility partnered with global ICT providers to trial Narrowband-Internet of Things (NB-IoT) technology on its network infrastructure on the Mornington Peninsula, in Melbourne’s CBD, and in the Dandenong Ranges. In an interview with Metering & Smart Energy International, Kevin Hutchings, managing director at South East Water, shares the results of the pilot and plans for future deployment. MSEI: What was the firm’s objective prior to the start of the trial? Why was the NB-IoT standard chosen, compared with other LPWA solutions available? KH: NB-IoT is just one of several (LPWAN) standards that we’re trialling. We’ve always recognised that connecting devices across our network, and being able to exchange data with assets regardless of their location, has huge benefits for our customers and our organisation. The ability to monitor and control on a real-time basis enables us to improve the reliability, efficiency and safety of our networks and assets, and we’re currently assessing the suitability of a range of low-powered wide area network (LPWAN) standards. Earlier this year we began trialling NB-IoT technology. As an open standards communications protocol standardised by 3GPP, NB-IoT has attracted widespread investment and has a number of strengths in areas like security. However, it’s just one technology of several that we’re trialling. MSEI: What did South East Water’s communication framework look like prior to the trial – what technology was used for data transfer? How successful has NB-IoT been in improving the reliability, efficiency and safety of its water and sewer assets? KH: South East Water’s communications framework is currently based on 3G, including our OneBox technology. Developed by South East Water, OneBox is an intelligent monitor-and- control device that underpins a range of water and wastewater solutions we deliver to customers. For example, we’re currently connecting 16,500 homes on south-east Australia’s Mornington Peninsula to a reticulated pressure sewer network, fitting each property with a OneBox device. Real-time data from OneBox enables our network operators to control waste water flows 36 from each property and identify faults across the network. OneBox is also used in our Tank-Talk solution, which uses real- time weather forecast data to control rainwater tank inflow and outflow, optimising capacity and reducing stormwater run-off. Replacing 3G technology in OneBox with an LPWAN communications platform like NB-IoT will enable us to design, build and operate these and other intelligent solutions more cost-effectively and to more customers in our region. Beyond OneBox, we’ve also trialled pre-standard NB-IoT chipsets in new environments, such as manhole entry points to monitor access to our assets, and also in parking areas at our facilities. Overall the trial has been a great success. Coverage and penetration have exceeded expectations. Not only is less power used to transfer data, but lower hardware costs make it feasible to connect to different asset types, and achieve a range of additional benefits. We're excited about the opportunities it presents. MSEI: What were some of the deployment considerations and challenges? KH: With our network spanning high density, suburban and rural environments, and with assets located above and below ground, distance, penetration and durability were all key factors. We therefore tested the technology in a range of different environments with different densities. The project included areas on the Mornington Peninsula, the Dandenong Ranges and Southbank, covering approximately 1,000 square kilometres in total. MSEI: NB-IoT works to connect objects in difficult to reach locations that have low power requirements and that have been too expensive to connect previously. Can you talk a bit about how it works and give examples of locations previously beyond reach that you anticipate will be connected with NB-IoT, especially with regard to the utility’s water networks? How has NB-IoT proved successful in terms of improved coverage and penetration? KH: One example is the use of NB-IoT technology on sensors in sewer mains, which are alerting us to potential sewer blockages sooner, and without the need for dangerous physical inspections. This wouldn’t have been viable with 3G communications only. INTERNET OF THINGS